Applications Case
Product center / Products



China · Shenzhen · Headquarter

Address:Floor2-4, Building 65,43#, FuKang Road, FuMin Industrial Park, PingHu, LongGang, ShenZhen, China

Manufacturing fast charging devices with NTC devices

Date: 2018-03-27
Viewed: 20
案例名称: Manufacturing fast charging devices with NTC devices

Portable electronics are growing rapidly, from mobile phones and MP3 players to PDAs, personal DVD players, and more traditional laptops, and people are revisiting many aspects of consumer and professional product design.

  This change is most evident in battery technology. Users want batteries to meet increasingly complex application needs, so they need more current and longer working hours. At the same time, the demand for small, lightweight products is also very strong, and the battery accounts for a considerable proportion of the volume and weight of any device. Therefore, manufacturers pay great attention to reducing their volume and weight. Another point is the requirement for fast charging, that is, reducing the time that the user waits for charging, and maximizing the advantages of mobility.

These requirements have prompted battery manufacturers to switch to new chemical materials such as nickel-metal hydride and lithium-ion to achieve higher power density, lighter weight and faster charging speeds. These features, especially fast charging, come at the cost of increased complexity. New batteries require precisely controlled charging circuits that not only ensure that they are fully charged, but also maximize their useful life and prevent possible hazards from overheating.

Failure of any component of the battery pack can have very serious consequences, not just because the product itself cannot be used because it cannot be powered. Recently, a company has recalled a number of laptop-specific batteries, which are estimated to cause losses of up to $400 million. In addition to possible financial damage, the battery can cause personal injury and even cause a fire.

Designing effective control strategies for battery charging (especially for high-energy lithium-ion batteries) requires good design and appropriate component specifications and procurement policies. The following architectures are available: For NiMH batteries, the charge control loop can monitor (using various levels of accuracy) the battery voltage as a function of time. You can also limit the maximum charging time; or let the system monitor temperature changes. In most cases, some kind of temperature monitoring method is needed to provide protection.

Lithium-ion batteries typically use the CCCV (constant current-constant voltage) scheme, but this still requires monitoring the temperature to allow for fast charging to be initiated, while also requiring a mechanism to ensure that charging is stopped when the temperature exceeds a safe threshold.

Therefore, all of these control and protection strategies should include temperature monitoring mechanisms as an integral part of the overall functional system. ICs that are typically placed in a charger or battery provide monitoring and control functions. But be sure to install one or more temperature sensors in the battery, charger, or battery compartment (as is often the case with low-cost phones).

For designers, the choice of such sensors is not large. Thermocouple devices require relatively complex compensation circuits, which can cause some calibration problems. In addition, they produce output voltages of a few mV, require signal conditioning, and are susceptible to electromagnetic noise.

Nickel or platinum positive temperature coefficient (PTC) metal film (or wire wound) resistors are sometimes used. Their long-term stability is better than thermocouple devices and is less susceptible to noise. However, because they rely on their own current to monitor temperature, and are typically low impedance devices, they consume relatively high amounts of power and their sensitivity to temperature changes is not sufficient to achieve reliable temperature monitoring. Most linear PTC semiconductor devices on the market have this drawback.

At present, the most effective solution is to use NTC (negative temperature coefficient) thermistor under the premise of reasonable cost performance. The NTC-based device from Amperon is a simple solution that consumes very little power, has excellent accuracy over a wide temperature range, and reacts quickly to temperature changes. From an engineer's point of view, these various sizes of devices offer great flexibility for electrical and structural design.

The most basic design and specification parameters for NTC devices are resistance values (usually values at 25 ° C) and tolerances. However, it must be remembered that the thermistor works closely with temperature. Therefore, engineers must ensure that their products are designed to work properly when the operating temperature reaches the limit. In high temperature (low impedance) environments, the value of the resistor must be high enough to reduce system errors such as contact resistance and interconnect resistance. Conversely, in a low temperature (high impedance) environment, if the current through the thermistor is not large enough, the sensitivity will decrease.

Tolerances are usually expressed in °C and can be used as a measure of the accuracy of the device's measurement of temperature. In a few cases, the manufacturer will give a tolerance expressed in terms of resistance value, ie how close the device resistance is to its expected resistance value at a given temperature. For detailed specifiers and purchasers, it is important to note that the tolerance requirements for a particular design can be limited to a specific temperature or to a slightly wider temperature range. In the second case, the tolerance itself will vary with the absolute resistance of the device. Designers need to calculate the resistance tolerance over the entire temperature range using the negative temperature coefficient specified for the device to ensure that the selected component meets the measurement accuracy requirements of the system.

The performance of the device is dependent on its material and structure over the operating temperature range and is described by the third basic specification, the device's R-T curve.

When ordering NTC-like devices, designers often specify only resistors, tolerances, and standard curves. However, in many cases other parameters are the key to ensuring that the system works as expected. One of the most important parameters is the b-value, which indicates the sensitivity of the device's resistance to temperature. Equally important is the calibration tolerance of the parameter. Amperon's devices have excellent b-values and tolerances for higher accuracy and better overall system reliability, as well as good performance over the entire operating temperature range of the device.

Finally, what is often overlooked by the buyer is that NTC-type devices need to be tightly mounted at the required temperature test points. This means that components must be able to withstand the physical stresses of modern manufacturing processes, especially if the temperature profile is steep for RoHS-compliant lead-free processes.

Battery technology will continue to evolve. But even the newer lithium polymer technology, which is smaller and has a longer life, still needs to monitor temperature in the control loop and protection circuit. Therefore, low-cost, high-precision, small-sized, and rugged NTC-type devices are still critical components in such applications, even if they are not respected.

Related to the case Case / More >
2018 - 03 - 27
点击次数: 20
Portable electronics are growing rapidly, from mobile phones and MP3 players to PDAs, personal DVD players, and more traditional laptops, and people are revisiting many aspects of consumer and profess...
2018 - 03 - 27
点击次数: 32
Application principle and related circuit of PTC thermistor for overcurrent protectionproduct descriptionPTC thermistor for overcurrent protection is a kind of protection element for automatic protect...
2018 - 03 - 27
点击次数: 23
Overcurrent protection circuit works When the circuit is in a normal state, the current through the overcurrent protection PTC thermistor is less than the rated current, and the overcurrent prote...
2018 - 03 - 27
点击次数: 22
Detailed description of the composition and principle of the switching power supply circuitFirs, the circuit composition of the switching power supplyThe main circuit of the switching power supply is ...
  • Scan the qr code
    Focus on the official WeChat
  • Scan the qr code
    Check the mobile version
Copyright © 2018 深圳安培龙科技股份有限公司
Rhino cloud provides cloud computing services