Products Products
Product center / Products
  • 发布时间: 2018 - 03 - 09
    氧传感器设计图:产品规格:外形尺寸(长宽厚mm)           (58.5±1)×(4.3±0.08)×(1.4±0.08)加热器电阻值(Ω)                                               9±1.5Ω瓷体强度(Kg)                         ...
    产品简述:氧传感器检测发动机尾气排放中的含氧量,并向电子控制单元(ECU)输送相应的电压信号,反映空气燃油混合比是稀还是浓。ECU会相应控制喷油量和进气量,使发动机运行在最佳空气燃油混合比状态,从而为三元催化器的尾气处理创造理想的条件。如果混合气太浓,必须减少燃油量,如果太稀薄,则要增加燃油量。在传统的发动机管理系统中,仅有一只氧传感器,称控制氧传感器,安装在三元催化器的上游位置。较新款的车配有诊断氧传感器,安装在三元催化器下游端。主要原因:控制氧传感器因老化,其向ECU输送的电压信号曲线会发生偏移,诊断氧传感器会检测控制氧传感器是否依然处于最佳工作状态,然后ECU就可计算出校正偏移所需的补偿量。产品特点:更快的起燃时间加热功率低驱动成本低对排气温度依赖更低双保护管头部抗各种冲击良好的抗老化性能抗涂层型和抗中毒性结构紧凑(振动等级高寿命更长
  • 发布时间: 2018 - 03 - 09
    氧传感器设计图:产品规格: 外形尺寸(长宽厚mm)           (58.5±1)×(4.3±0.08)×(1.4±0.08) 加热器电阻值(Ω)                                               9±1.5Ω 瓷体强度(Kg)                        ...
    氧传感器检测发动机尾气排放中的含氧量,并向电子控制单元(ECU)输送相应的电压信号,反映空气燃油混合比是稀还是浓。ECU会相应控制喷油量和进气量,使发动机运行在最佳空气燃油混合比状态,从而为三元催化器的尾气处理创造理想的条件。
Contact

TEL:86-755-84012223

FAX:86-755-84012280

E-mail:sales@ampron.com

中国 · 深圳 · 总部

Address:Floor2-4, Building 65,43#, FuKang Road, FuMin Industrial Park, PingHu, LongGang, ShenZhen, China

产品名称: Oxygen sensor chip
上市日期:2018-03-29

Oxygen sensor chip

Product introduction: product description The sensor detects the oxygen level of engine Exhaust emissions and output the corresponding Signal to ECU for reflecting whether the air-fuel Ratio is dense or diluted.  ECU will control Fuel-injection and air-input to make it a best air-fuel ratio status, thereby creating an ideal condition for three-way catalyst’s work.If the gas mixture is too dense, then the fuel must be Reduced, but if it’s too dilute,then the fuel injection Must be increased. There is only one lambda sensor in a Traditional engine, which is called controlling lambda sensor And it’s installed at the upstream position of three-way Catalyst. there is a diagnosis lambda sensor in newer style Car which is installed at the downstream position of three-Way catalyst to detect whether the controlling lambda sensor is In a best working condition. then the ECU will work out the Compensation dosage of the request of calibration offset.Product features    1.Faster light-off time    2.Low heating power    3.Low drive cost    4.Lower dependence on exhaust temperature    5.Double protection tube head against various shocks    6.Good anti-aging properties    7.Anti-coating type and anti-toxicity    8.Compact structure (high vibration level)    9.Longer life
面料: Product structure outline drawing:
类别: 6365793755281739973621360.pdf
型号:

1.Automotive field

2.internal combustion engine

3.metal industry

4.Industrial boiler burner

5.Ceramics, cement industry

6.Chemical synthesis

7.Biology and food


  • Product introduction
  • Range of application
  • Product parameters
  • Download the data

product description


The sensor detects the oxygen level of engine Exhaust emissions and output the corresponding Signal to ECU for reflecting whether the air-fuel Ratio is dense or diluted.  ECU will control Fuel-injection and air-input to make it a best air-fuel ratio status, thereby creating an ideal condition for three-way catalyst’s work.

If the gas mixture is too dense, then the fuel must be Reduced, but if it’s too dilute,

then the fuel injection Must be increased. There is only one lambda sensor in a Traditional engine, which is called controlling lambda sensor And it’s installed at the upstream position of three-way Catalyst. there is a diagnosis lambda sensor in newer style Car which is installed at the downstream position of three-Way catalyst to detect whether the controlling lambda sensor is In a best working condition. then the ECU will work out the Compensation dosage of the request of calibration offset.


Product features

    1.Faster light-off time

    2.Low heating power

    3.Low drive cost

    4.Lower dependence on exhaust temperature

    5.Double protection tube head against various shocks

    6.Good anti-aging properties

    7.Anti-coating type and anti-toxicity

    8.Compact structure (high vibration level)

    9.Longer life


1.Automotive field

2.internal combustion engine

3.metal industry

4.Industrial boiler burner

5.Ceramics, cement industry

6.Chemical synthesis

7.Biology and food


Product structure outline drawing:

 氧传感器芯片

Related to recommend / Products more
  • 产品简述:氧传感器检测发动机尾气排放中的含氧量,并向电子控制单元(ECU)输送相应的电压信号,反映空气燃油混合比是稀还是浓。ECU会相应控制喷油量和进气量,使发动机运行在最佳空气燃油混合比状态,从而为三元催化器的尾气处理创造理想的条件。如果混合气太浓,必须减少燃油量,如果太稀薄,则要增加燃油量。在传统的发动机管理系统中,仅有一只氧传感器,称控制氧传感器,安装在三元催化器的上游位置。较新款的车配有诊断氧传感器,安装在三元催化器下游端。主要原因:控制氧传感器因老化,其向ECU输送的电压信号曲线会发生偏移,诊断氧传感器会检测控制氧传感器是否依然处于最佳工作状态,然后ECU就可计算出校正偏移所需的补偿量。产品特点:更快的起燃时间加热功率低驱动成本低对排气温度依赖更低双保护管头部抗各种冲击良好的抗老化性能抗涂层型和抗中毒性结构紧凑(振动等级高寿命更长
    会员价: 0 RMB
    市场价: 0 RMB
    发布时间: 2018 - 03 - 09
  • 氧传感器检测发动机尾气排放中的含氧量,并向电子控制单元(ECU)输送相应的电压信号,反映空气燃油混合比是稀还是浓。ECU会相应控制喷油量和进气量,使发动机运行在最佳空气燃油混合比状态,从而为三元催化器的尾气处理创造理想的条件。
    会员价: 0 RMB
    市场价: 0 RMB
    发布时间: 2018 - 03 - 09
link:
  • Scan the qr code
    Focus on the official WeChat
  • Scan the qr code
    Check the mobile version
Copyright © 2018 深圳安培龙科技股份有限公司
Rhino cloud provides cloud computing services
犀牛云提供云计算服务