Products Products
Product center / Products
Contact

TEL:86-755-89695922

FAX:86-755-84012280

E-mail:sales@ampron.com

China · Shenzhen · Headquarter

Address:Floor2-4, Building 65,43#, FuKang Road, FuMin Industrial Park, PingHu, LongGang, ShenZhen, China

产品名称: lectric vehicle vacuum MAP pressure sensor
上市日期:2019-07-16

lectric vehicle vacuum MAP pressure sensor

Product introduction: This product is made with advanced micro-electromechanical principle. The core technology is MEMS pressure sensor chip based on piezoresistive effect and high-performance signal conditioning AISC chip. It has excellent quality and recision package. It uses mature and reliable calibration, compensation and protection technology to respond. Fast, reliable, and stable, it is a cost-effective sensor product. It can fully meet the requirements of the electric vehicle vacuum boosting system.
面料: Supply voltage: 6~20VVacuum pump starting pressure: -45±2.5 Kpa (range adjustable)Vacuum pump stop pressure: -75±2.5 Kpa (range adjustable)Operating temperature: -30°C-+125°CStorage temperature: -40°C-+130°CMaximum current resistance: 10ALow vacuum pressure protection: YesOver current protection: YesContinuous working time: 5minVibration: 10g (50Hz-2000Hz)Protection level: Ip66Short circuit protection: YesESD standard: PIN needle air discharge ± 8KV                         housing air discharge ±16KVEMC standard: ISO11452-5(512MHz-1GHz) 50V/m(1MHz-512MHz) 100V/m
类别: lectric vehicle vacuum MAP pressure sensor.pdf
型号:

Electric car

  • Product introduction
  • Range of application
  • Product parameters
  • Download the data

This product is made with advanced micro-electromechanical principle. The core technology is MEMS pressure sensor chip based on piezoresistive effect and high-performance signal conditioning AISC chip. It has excellent quality and recision package. It uses mature and reliable calibration, compensation and protection technology to respond. Fast, reliable, and stable, it is a cost-effective sensor product. It can fully meet the requirements of the electric vehicle vacuum boosting system.


Electric car

Supply voltage: 6~20V

Vacuum pump starting pressure: -45±2.5 Kpa (range adjustable)

Vacuum pump stop pressure: -75±2.5 Kpa (range adjustable)

Operating temperature: -30°C-+125°C

Storage temperature: -40°C-+130°C

Maximum current resistance: 10A

Low vacuum pressure protection: Yes

Over current protection: Yes

Continuous working time: 5min

Vibration: 10g (50Hz-2000Hz)

Protection level: Ip66

Short circuit protection: Yes

ESD standard: PIN needle air discharge ± 8KV

                         housing air discharge ±16KV

EMC standard: ISO11452-5

(512MHz-1GHz) 50V/m

(1MHz-512MHz) 100V/m


Related to recommend / Products more
  • product descriptionThe capacitive ceramic pressure sensor used for ACCP series automobile is a kind of dry-type capacitive ceramic pressure sensor which is refined and become from special ceramic material.Ceramic is a highly recognized material with high elasticity,resistant to corrosion, resistant to bear.resistant to shock and vibration.The heat stability can make the working temperature reach-40~135℃,and also it had high measuring  accuracy, high stabilityAnd the overload capacity can reach up to 100 times of the measuring range which can solve the bad overload capacitive at small measuring range of the other kind of sensors. Beside of the normal measuring range .its speciality is the plus-minus gage pressure function.eg.±10kPa,±1MPa and so onAmpron’s capacitive ceramic pressure sensor gathers with advanced material and process home and abroad with thick film, thin film,low temperature cofired ceramic.composite Ampron’s ten years accumulated many achievements of ceramic technology with special technology,the key performance indicators of the capacitive ceramic pressure sensor used for ACCP series automobile has absolute leading position in domestic .and compared with the indicators of the foreign advanced products are also not inferior.It is an only enterprise which has mastered the core technology pf capacitive ceramic pressure sensor and can form batch production.Product features    1.The measurement accuracy is high, and it can ensure the measurement of the pressure including air, compressed gas and liquid in the fluid system.    2.According to the customer to choose,PWM or voltage output interface type    3.Ceramic capacitor structure,fast response,good compatibility of medium
    会员价: 0 RMB
    市场价: 0 RMB
    发布时间: 2018 - 03 - 28
  • product descriptionThe capacitive ceramic pressure sensor used for ACCP series automobile is a kind of dry-type capacitive ceramic pressure sensor which is refined and become from special ceramic material.Ceramic is a highly recognized material with high elasticity,resistant to corrosion, resistant to bear.resistant to shock and vibration.The heat stability can make the working temperature reach-40~135℃,and also it had high measuring  accuracy, high stabilityAnd the overload capacity can reach up to 100 times of the measuring range which can solve the bad overload capacitive at small measuring range of the other kind of sensors. Beside of the normal measuring range .its speciality is the plus-minus gage pressure function.eg.±10kPa,±1MPa and so onAmpron’s capacitive ceramic pressure sensor gathers with advanced material and process home and abroad with thick film, thin film,low temperature cofired ceramic.composite Ampron’s ten years accumulated many achievements of ceramic technology with special technology,the key performance indicators of the capacitive ceramic pressure sensor used for ACCP series automobile has absolute leading position in domestic .and compared with the indicators of the foreign advanced products are also not inferior.It is an only enterprise which has mastered the core technology pf capacitive ceramic pressure sensor and can form batch production.Product features    1.High measurement accuracy, able to accurately measure the steam pressure in the steam voltage cooker.    2.According to the customer to choose,PWM or voltage output interface type    3.Ceramic capacitor structure,fast response,good compatibility of medium
    会员价: 0 RMB
    市场价: 0 RMB
    发布时间: 2018 - 03 - 28
  • product descriptionThe capacitive ceramic pressure sensor used for ACCP series automobile is a kind of dry-type capacitive ceramic pressure sensor which is refined and become from special ceramic material.Ceramic is a highly recognized material with high elasticity,resistant to corrosion, resistant to bear.resistant to shock and vibration.The heat stability can make the working temperature reach-40~135℃,and also it had high measuring  accuracy, high stabilityAnd the overload capacity can reach up to 100 times of the measuring range which can solve the bad overload capacitive at small measuring range of the other kind of sensors. Beside of the normal measuring range .its speciality is the plus-minus gage pressure function.eg.±10kPa,±1MPa and so onAmpron’s capacitive ceramic pressure sensor gathers with advanced material and process home and abroad with thick film, thin film,low temperature cofired ceramic.composite Ampron’s ten years accumulated many achievements of ceramic technology with special technology,the key performance indicators of the capacitive ceramic pressure sensor used for ACCP series automobile has absolute leading position in domestic .and compared with the indicators of the foreign advanced products are also not inferior.It is an only enterprise which has mastered the core technology pf capacitive ceramic pressure sensor and can form batch production.Product features    1.High measurement accuracy, accurate measurement of small range pressure difference, and measurement of other media, gas and liquid pressure within the range.    2.According to the customer to choose,PWM or voltage output interface type    3.Ceramic capacitor structure,fast response,good compatibility of medium
    会员价: 0 RMB
    市场价: 0 RMB
    发布时间: 2018 - 03 - 28
link:
  • Scan the qr code
    Focus on the official WeChat
  • Scan the qr code
    Check the mobile version
Copyright © 2018 深圳安培龙科技股份有限公司
Rhino cloud provides cloud computing services
犀牛云提供云计算服务